Cruzer Mini 1.0 Gb Driver - zip-ing72’s blog

I have a SanDisk Cruser mini 1.0 GB flash drive that worked fine only once. Now i don t know what happend to it.. it has stopped working. when I plug it into any computer a the light on the flash drive turns on and the drive gets detected and a drive letter also gets assigined. when i click on it the system hags for very long period and then shows a mesage something like semsphore lock timed out, i tried to format it from DOS window of XP, i got the message Track Zero bad. is there a way to fix my drive.

Thanks

B. Ravi Shankar

I have the same problem too

Only thing mine is a 512 drive Any suggestions on what to do

Help needed urgently

i am still waiting to hear the solution from some one

have you checked that the lock is not on..

it should be a little switch at the side that locks the usb drive..i have a buffalo 1gig stick and theres is a small white switch on the side that locks the drive check for one on your model..

it dosen t have any locks on the stick

I had a similar problem with a 256 cruzer mini, try right clicking on my computer select manage then disk management your cruzer should be listed there. I had to re partition and then reformat as FAT drive. that worked for me.

OK Can you guyz tell me which buttin to click to Repartition the drive .

I see the fromat button but no repartition button

help me out here

The error I was getting was that the drive came up and was assigned a letter, but when I clicked to open it windows said to insert a disk in the drive. When I went to disk management the only option was to partition the drive, the partition wizard came up and did its thing.

I have just stuck my mini back in the USB and gone to disk management, when it comes up the only option I have by right clicking is to format, it sounds as tho your mini has not lost its partition, try formatting in disk management.

When i try to format it say the format was unsuccessful what am i to do now. .

I m sorry I cant suggest any thing else to try, except to contact sandisk customer support, best of luck

Don t bother trying Sandisk s website - it s got one of the most pathetic tech support pages ever. I accidently wiped out the partition on my Cruzer Micro, and windows could not access or format it, and there is literally nothing on Sandisk s web site to help. But I found a nifty little program by HP that will not only reformat a flash drive, it can even make it bootable if your mobo supports booting from a removable USB drive. It s small 356K and very easy to use. I can t seem to find it on HP s website, hjowever, but if you Google this file name:

HPUSBF_GUIversion.zip

you will get the site that I downloaded it from in a thread on another site about this same problem. It worked beautifully for me. Good Luck. :slurp:

Please use the search feature, we probably have over 100 posts about flash drives no longer working, and I bet over half of them are involving the Sandisk Cruzer Mini.

There seems to be no 1 solution to fixing this, but there are a lot of posts about people fixing it, use the search feature and scan through the results. You answer lies there I m sure.

New scandisk problem.

I don t know where to ask for help, so I figure some or one might help me solve my problem

I had a flash drive: Scandisk Mini Cruzer 512MB.

My problem is I erased the driver, just the driver but not the volume itself. To be more specific there are the two drivers appear when you go the Utilities then Disk Utility. In the diskc utility the first driver will appear--other than the two driver, which is the Hard Drive and the HD Macintosh. Below that two is Flash Drive and the driver, it s colored white that when you put your Flash Drive onto your computer it will appear on the desktop and Finder as well.

So, here s my problem. I erased the volume, the drive that appears on the desktop and when I put my flash Drive in other computer other than Mac, PC Windows at school. And when I try to open it a window appears that says:

The disk is not formated. Do you wanna format.

Yes. or No.

I try to format but I couldn t because it say s:

You don t have the sufficient rights to perform this opperation.

Though the good thing is I can still use the Flash Drive to my Mac, but to PC, I couldn t. The PC couldn t format the Flash Drive.

Any suggestions other than tell me to ask the Scandisk website itself. Because the webiste sucks. I tried when I try to regrister but I don t know. I couldn t get in to make an account or something.

Thanks,

Louise

OK guys..first to first

Hello m8s,

Eventhough this is an old thread I want to give some input on it.

The Sandisk problem when you plug in your pen drive in XP:

a.- The green led will be on

b.- XP will recognize the pen drive and assign a drive letter to it

c.- You get a media error where XP ask you to insert a disk

Before you do anything, dont even try to format, or repartioning your pen drive. First step is to recover the data in there. Yes, you data would still there even though it seems an invalid media error.

So to recover your data, before you do anything else, there are good programs out there but dont even try to use the one that sandisk webpage provide in their support sectionit is worthless as all the technical support there

The program I use to recover the data was Stellar Phoenix FAT and NTFS ver 2.1 I use this program to recover delete data and now it works for even losing partition. However this program wont fix your partition table problems.

Now, after recover your data, it wont be wise to use any software out there to repartition your pen drive. It would wisely to repair your partition table and then reformat your pen drive. For this part, I would like to know if anyone has any good tools for repairing partions tables and logical drive assigment

Anyway, these were my 2 cents for the community

Sincerely,

Hi All,

i got my device replaced by sandisk.

They have a very easy procedure for getting ur device replace

open the link

Click on Register your Produce enter ur product details

then Click on the Support / FAQ s tab and post ur query over there.

They would respond to ur queries

and if, the device could not be repaired then they might replace the device.

Best of Luck

Regards

B, Ravi Shankar

ScanDisk Flash with U3 Security Software

Does anyone actually KNOW if you can DELETE the U3 security software

that is already ON a ScanDisk 2.0 GB Flash Drive when you first buy one.

I recently purchased a ScanDisk 4.0 GB stick - it doesn t have the U3,

but has OTHER add-ons.It s the one that also comes with TWO cover caps.

I know if you attempt to format drives on XP, it SETS the amount of space.

So how can you BYPASS this method on XP.or CAN you.

Flash Drives lose about 5-10 MB with all that JUNK on them

WHY do they even DO this in the first place. - - - - GEEZ.

The LAST BEST drive I ever purchased was about 2 years ago:

an IMATION 1 GB stick - that still gives me a great 999 MB

..BECAUSE it had NO - extra software on it.

later Imation flash drives changed their production line.. allowing less space.

A Flash Drive should have AT LEAST 500k-1 MB less than the full monty,

given the consideration that there s to be needed cushion room correct.

-InfoNet

im here to help

i had the same problem for like 3 hour i work my way out of it if u have a copy of windows xp you could fix this problem bout u have to be really careful not to delete your recent file or reset windows xp and boot from the disk and make sure u plug in your cruzer driver and follow steps and when it come to the screen where it show what is ur HD size and u will seen the cruzer driver size there too and create a small file size 8mb and reset your pc and go to my computer and format the cruzer disk not your HD if dont get it wait ill put a lil video on youtube or Email me at player4life2010 msn.com and ill tell you step by step what to do to solve your problem thank you.

SanDisk Micro or Mini Cruzer Free Driver Download for Windows 98SE, 98 - Sandisk_Cruzer_Micro__or_Mini_Flash_Drive_Win_98SE.zip. World s most popular driver.
Can I use my 2gb micro cruzer on windows 98. How. Ok guys, this intrigued me as well, but the Z6 Cruzer Micros CAN be used in Win98 SE machines.
USA.com provides easy to find states, metro areas, counties, cities, zip codes, and area codes information, including population, races, income, housing, school.
SanDisk Free Driver Download Free Download SanDisk Corporation drivers. World s most popular driver download site.

8212zl Chassis switch roll from J8715A to J8715B Q: Why is HP ProCurve Rolling J8715A/HP ProCurve 8212zl Switch. Q: Does the new J8715B/8212zl Base System.

windows 98se and sandisk cruzer mini usb flash drive 1.0gb

Build a PC - Scandisk 1.0 GB Cruzer Mini Flash Drive not working

04-17-2010

I am curious to know if I can download the driver to use the cruzer mini with windows 98se operating system. The packaging says the cruzer mini is compatible with win 98se but I am not sure. Has anyone run into problems trying to install the driver.

I have a SanDisk Cruiser that just died all of a sudden.

I took the case apart and checked for continuity between each of the 4 copper connectors in the USB portion of the drive, and the back of the soldered joints where it solders to the motherboard. Good continutiy.

I plugged the drive into my laptop, and used a meter to check for power, and it appears to be getting the 5 volts that the manufacturer says it should.

However, the light on the stick never comes on, the PC never even attempts to recogonize the device.

I m wondering if there s a resistor/capacitor/etc on the board that has shorted out somehow.

Anyone had any luck diagnosing the circuitry of the board, and or know how to recover the data on the memory Aside from sending it out to a company for 125.

Thanks,

chris

04-26-2010

I have a 2 8G cruzer micro flashes the both have the same problem

I installed it and it was being perfect the day before

The red light is on but arent flashing anymore

It isnt detected on the Device Manager or anywere else on alot of computers

I even tried this page

And it didnt work

what to do

coz the two flashing have the same problem

please help

04-30-2010

my computer is telling me it is incompatible to install cruzerlock version 1.1. what can I do. I have very important pictures on it and I am nervous about it. Is there anyone that can help me. It would be greatly appreciated. THANK YOU

Thank you for your reply. I appreciate it.

I open My Documents, click Edit Select All, then choose Copy to the flash drive.

The first time took quite a while. But, when I do my weekly backups, it takes just as long. That s why I thought it was re-copying the entire folder.

Message Edited by iluvtolaff on 05-04-2010 PM

05-07-2010

Hi.

Unfortunately some employees left our company. and one of them was the IT guy which handed out the USB Sticks.

Is there a possibility to format or reset the stick. the data on the stick is unimportant

Kind regards

harry

05-22-2010

Hello

I have a Sandisk cruzer 8gb SDCZ6-8192RB and all of a suden its working The light does not turn on, nor is my laptop and desktop compture is registering the flash drive, plus the item gets really hot when it s in the USB for a least 8-10 minutes and that has never happened before.

Is there a solution to this problem.

Posts: 0

Options

Mark as New

Bookmark

Subscribe to RSS Feed

Highlight

Email to a Friend

Report Inappropriate Content

05-29-2010

After inserting the disk in the USB asking for a format important data is STORED please help me to recover data without format.